Editing ASUS RT-AC3200 (section)

{{Infobox Embedded System
|image1             = Asus RT-AC3200 top.jpg
|image1_size        = 200px
|caption            = Wireless-AC3200 Tri-Band Gigabit Router
|caption2           = <!-- 2nd tagleine -->
|pp                 = https://www.asus.com/Networking/RTAC3200/
|sp                 = <!-- Support page url only -->
|dl                 = <!-- Download page url only -->
|wikidevi           = ASUS_RT-AC3200
|wikipedia          = <!-- [[wikipedia:Main Page|Wikipedia]] Leave blank for none -->
|ddwrtsupport       = Supported
|openwrtsupport     = <!-- Supported, Not Supported, Incompatible, or leave blank for unknown -->
|tomatosupport      = Supported
|gargoylesupport    = <!-- Supported, Not Supported, Incompatible, or leave blank for unknown -->

|brand              = ASUS
|model              = RT-AC3200
|submodelappend     = <!-- yes, for space -->
|submodel           = <!-- SubModel number, Leave blank for unknown -->
|revision           = A
|subrevision        = (2.34)
|model_part_num     = 
|page_start_date    = 
|page_start_origon  = 
|wlclass            = AC32003R
|series             = <!-- Device series -->
|type               = wireless router
|sernum             = <!-- First 4 or so for easy version identification -->
|fcc_id             = MSQ-RT0M00
|icid               = 3568A-RT0M00
|us_id              = <!-- US ID number -->
|boardid            = <!-- Board Identification, Leave blank for none -->
|ecc_id             = <!-- eec-id -->

|cpu1chip1          = Broadcom;BCM4709A0;
|cpu1_cores         = 2
|cpu1_type          = ARMv7
|cpu1_type_rev      = Cortex-A9 (v132)
|cpu1spd            = 1.0 GHz
|bus                = <!-- 8-bit, 16-bit, 32-bit, 64-bit, Leave blank for none -->

|flash1type         = <!-- Parallel,Serial(SPI),SPI NOR,NAND,Compact Flash, -->
|fla1_num           = <!-- 1,2,3,4 -->
|fla1chip           = Spansion;S34ML01G100TFI00;
|flash1size         = 128
|flash1maxsize      = <!-- Maximum size firmware can be in bytes -->

|ram1type           = <!-- DDR,DDR2,DDR3,DDR4, -->
|ram1type1          = <!-- SO-DIMM,SDRAM, -->
|ram1spd            = <!-- 3400,3333,3300,3200,3100,3000,2800,2666,2600,2400,2133,2000,1866,1600,1066,1333,800 -->
|ram1size           = 256
|ram1chip           = ESMT;M15F2G16128A-BDB;
|ram1_num           = <!-- Number of Ram chips -->
|nvramsize          = 64/128

|eth_cpu            = true
|sw_cpu             = true
|wan_ports          = 1
|wan_speed          = 1GbE
|lan_ports          = 4
|lan_speed          = 1GbE
|ethstandard        = <!-- IEEE 802.3?,IEEE 802.3,IEEE 802.3/3u,IEEE 802.3/3u/3ab,IEEE 802.3/3u/3x,IEEE 802.1x/3/3ab/3u/3x/3z -->
|portbasedvlan      = <!-- Support for port based vlan tagging, Leave blank for unknown -->
|802.1qvlan         = <!-- Support for 802.1q vlan tagging, Leave blank for unknown -->
|auto_mdix          = <!-- mdix support -->
|sup_jumbo          = <!-- Jumbo frames support -->
|ethoui             = AC:9E:17,2C:4D:54
|oui                = AC:9E:17,2C:4D:54

|bootwait           = <!-- On or Off, Leave blank for unknown -->
|stockbootloader    = CFE;;;
|stockos            = Linux;;;

|exp_if_types       = USB 3.0, USB 2.0
|exp_usb_num        = 2
|usb_hub            = <!-- USB hub compatibility -->

|pwr_volt_type      = VDC
|pwr_vdc            = 19
|pwr_amp_dc         = 2.37
|pwr_conn           = barrel
|pwr_barrel_outer   = <!-- Outer barrel size in mm -->
|pwr_barrel_inner   = <!-- Inner barrel size in mm -->
|pwr_barrel_len     = <!-- Length of barrel -->
|pwr_pol            = <!-- Connector polarity -->

|serial             = yes,, internal,, 4-pin header,, populated,, 3.3V TTL
|jtag               = <!-- Full JTAG info -->

|specialfeat        = <!-- Features that don't fit any place else, Leave blank for none -->
|flags              = <!-- flags, Leave blank for none -->
|addchip            = 2.4GHz Power Amplifier IC;Richwave;RTC6649E;;3; ,,,
5GHz Power Amplifier IC;Skyworks;SE5003L1;SiGe,5003L1;;6; ,,,
3-lane, 3-port PCIe Gen2 Switch;PLX Technology;PEX8603;;1;
|802dot11_protocols = abgn+ac

|defaulip           = 192.168.1.1
|defaultlogin       = admin
|defaultpass        = admin
|defaultssid        = ASUS,ASUS_5G-1,ASUS_5G-2
|defaultssid_regex  = ^ASUS(_5G-[12])?.*$
|default_ch         = <!-- Defaults channel(s) Radio(s) are set to -->
|manuf              = Arcadyan
|manuf_model        = <!-- Manufacturer Model -->
|manuf_rev          = <!-- Manufacturer Revision -->
|is_manuf           = No
|tpfirmware         = AsusWRT-Merlin,DD-WRT,FreshTomato-ARM,Tomato (shibby)

|availability       = <!-- Market availability -->
|eoldate            = <!-- End of Life date -->
|fccapprovdate      = 12/19/2014
|estreldate         = <!-- Estimated release date -->
|estprice           = 200
|upc                = <!-- UPC number -->
|ean                = <!-- EAN number -->
|dx_sku             = <!-- DealExtreme sku -->
|newegg             = N82E16833320218
|asin               = B00S9SGNNS
|asin_country       = <!-- ASIN country -->
|asin2              = <!-- ASIN number -->
|asin_country2      = <!-- ASIN country -->
|countrymanuf       = China

|buttons            = <!-- buttons available -->
|led                = <!-- Led colors and descriptions -->
|dimensions         = <!-- Size of device {{convert |length|x|widthordepth|x|height|in|mm}} -->
|weight             = <!-- Weight of device {{convert|weight|oz|g}} -->

|wi1_if_name        = wl1/eth1
|rad1chip1          = Broadcom;BCM43602;
|rad1oui            = <!-- Only if different from above OUI --> 
|rad1_ant_conn      = U.FL, RP-SMA
|rad1txchains       = 3
|rad1rxchains       = 3
|rad1sstreams       = 3
|rad1stand          = IEEE 802.11a/n/ac
|rad1ac             = 1300
|nqam1              = 600
|rad1n              = 450
|rad1a              = 54
|rad1freq           = 5
|rad1correv         = <!-- core revision, Leave blank for none or unknown -->
|rad1cap            = <!-- radio capabilities, Leave blank for none or unknown -->

|wi2_if_name        = wl0/eth2
|rad2chip1          = Broadcom;BCM43602;
|rad2oui            = <!-- Only if different from above OUI --> 
|rad2_ant_conn      = U.FL, RP-SMA
|rad2txchains       = 3
|rad2rxchains       = 3
|rad2sstreams       = 3
|rad2stand          = IEEE 802.11b/g/n
|nqam2              = 600
|rad2n              = 450
|rad2g              = 54
|rad2b              = 11
|rad2freq           = 2.4
|rad2correv         = <!-- core revision, Leave blank for none or unknown -->
|rad2cap            = <!-- radio capabilities, Leave blank for none or unknown -->

|wi3_if_name        = wl2/eth3
|rad3chip1          = Broadcom;BCM43602;
|rad3oui            = <!-- Only if different from above OUI -->
|rad3_ant_conn      = U.FL, RP-SMA
|rad3txchains       = 3
|rad3rxchains       = 3
|rad3sstreams       = 3
|rad3stand          = IEEE 802.11a/n/ac
|rad3ac             = 1300
|nqam3              = 600
|rad3n              = 450
|rad3a              = 54
|rad3freq           = 5
|rad3correv         = <!-- core revision, Leave blank for none or unknown -->
|rad3cap            = <!-- radio capabilities, Leave blank for none or unknown -->

}}{{TIDTOC|embedded}}