Editing Linksys WRT160N v2

{{Infobox Embedded System
|image1             = Linksys_WRT160N_01.jpg
|image1_size        = 200px
|caption            = Ultra RangePlus Wireless-N Broadband Router
|caption2           = <!-- 2nd tagleine -->
|pp                 = <!-- product page url only -->
|sp                 = http://support.linksys.com/en-us/support/lbc/WRT160N
|dl                 = <!-- Download page url only -->
|fandom             = Linksys_WRT160N_v2.0
|wikidevi           = <!-- wikidevi.wi-cat.ru page, included underscores -->
|wikipedia          = <!-- [[wikipedia:Main Page|Wikipedia]] Leave blank for none -->
|ddwrtsupport       = <!-- Supported, Not Supported, Incompatible, or leave blank for unknown -->
|openwrtsupport     = Supported
|tomatosupport      = <!-- Supported, Not Supported, Incompatible, or leave blank for unknown -->
|gargoylesupport    = <!-- Supported, Not Supported, Incompatible, or leave blank for unknown -->

|brand              = Linksys
|model              = WRT160N
|submodelappend     = <!-- yes, for space -->
|submodel           = <!-- SubModel number, Leave blank for unknown -->
|revision           = v2
|subrevision        = <!-- Model Subrevision, Leave blank for none or unknown -->
|model_part_num     = 
|page_start_date    = 08/01/2010
|page_start_origon  = https://infodepot.fandom.com/wiki/Linksys_WRT160N_v2.0
|wlclass            = N300
|series             = <!-- Device series -->
|type               = wireless router
|sernum             = <!-- First 4 or so for easy version identification -->
|fcc_id             = Q87-WRT160NV2
|icid               = 3839A-WRT160NV2
|us_id              = <!-- US ID number -->
|boardid            = <!-- Board Identification, Leave blank for none -->
|ecc_id             = <!-- eec-id -->

|cpu1chip1          = Ralink;RT2880;
|cpu1_cores         = 1
|cpu1_type          = MIPS 4KEc
|cpu1_type_rev      = <!-- CPU1 type Revision, Leave blank for unknown -->
|cpu1spd            = 266
|bus                = <!-- 8-bit, 16-bit, 32-bit, 64-bit, Leave blank for none -->

|flash1type         = <!-- Parallel,Serial(SPI),SPI NOR,NAND,Compact Flash, -->
|fla1_num           = <!-- 1,2,3,4 -->
|fla1chip           = Eon;EN29LV320AB-70TCP;
|flash1size         = 4
|flash1maxsize      = <!-- Maximum size firmware can be in bytes -->

|ram1type           = <!-- DDR,DDR2,DDR3,DDR4, -->
|ram1type1          = <!-- SO-DIMM,SDRAM, -->
|ram1spd            = <!-- 3400,3333,3300,3200,3100,3000,2800,2666,2600,2400,2133,2000,1866,1600,1066,1333,800 -->
|ram1size           = 16
|ram1chip           = PSC;A2V64S40CTP-G6;
|ram1_num           = 2
|nvramsize          = <!-- 32, 60, 64, etc... in kb, Leave blank for unknown -->

|eth_cpu            = true
|sw1chip            = Realtek;RTL8306SD;
|wan_ports          = 1
|wan_speed          = <!-- 10MbE,100MbE,1GbE, -->
|lan_ports          = 4
|lan_speed          = 100MbE
|ethstandard        = <!-- IEEE 802.3?,IEEE 802.3,IEEE 802.3/3u,IEEE 802.3/3u/3ab,IEEE 802.3/3u/3x,IEEE 802.1x/3/3ab/3u/3x/3z -->
|portbasedvlan      = <!-- Support for port based vlan tagging, Leave blank for unknown -->
|802.1qvlan         = <!-- Support for 802.1q vlan tagging, Leave blank for unknown -->
|auto_mdix          = <!-- mdix support -->
|sup_jumbo          = <!-- Jumbo frames support -->
|ethoui             = 00:21:29, 00:22:6B, 00:23:69
|oui                = 00:21:29, 00:22:6B, 00:23:69

|bootwait           = <!-- On or Off, Leave blank for unknown -->
|stockbootloader    = <!-- Name;Version;Distro -->
|stockos            = <!-- Name;Version;Distro -->

|exp_if_types       = <!-- Expansion Interface types, Leave blank for none -->
|exp_sim_num        = <!-- Number of sim Slots, Leave blank for none -->
|exp_pcmcia_num     = <!-- Number of pcmcia ports, Leave blank for none -->
|exp_expcard_num    = <!-- Number of Expresscard ports, Leave blank for none -->
|exp_minipci_num    = <!-- Number of Mini PCI Slots, Leave blank for none -->
|exp_minipcie_num   = <!-- Number of Mini PCIexpress Slots, Leave blank for none -->
|exp_usb_num        = <!-- Number of USB Ports, Leave blank for none -->
|exp_cf_num         = <!-- Number Compact Flash Slots, Leave blank for none -->
|exp_sdmmc_num      = <!-- Number SD/MMC Slots, Leave blank for none -->
|exp_ide_num        = <!-- Number of ide ports, Leave blank for none -->
|exp_ata_num        = <!-- Number of ATA Ports, Leave blank for none -->
|exp_sata_num       = <!-- Number of sata ports, Leave blank for none -->
|exp_esata_num      = <!-- Number of esata ports, Leave blank for none -->
|exp_parallel       = <!-- Number of parallel ports, Leave blank for none -->
|exp_sfp_num        = <!-- Number of sfp ports, Leave blank for none -->
|exp_M.2            = <!-- Number of M.2 ports, Leave blank for none -->
|usb_hub            = <!-- USB hub compatibility -->

|pwr_volt_type      = VDC
|pwr_vdc            = 12
|pwr_amp_dc         = 1
|pwr_conn           = barrel
|pwr_barrel_outer   = <!-- Outer barrel size in mm -->
|pwr_barrel_inner   = <!-- Inner barrel size in mm -->
|pwr_barrel_len     = <!-- Length of barrel -->
|pwr_pol            = <!-- Connector polarity -->

|serial             = yes,, 5-pin header,, internal,, J10,, (115200 8N1)
|jtag               = yes,, looks like it,, J11

|specialfeat        = <!-- Features that don't fit any place else, Leave blank for none -->
|flags              = <!-- flags, Leave blank for none -->
|addchip            = 2.4GHz Power Amplifier IC;Richwave;RTC6694;;2;SiGe;QFN24;
|802dot11_protocols = bgn

|defaulip           = 192.168.1.1
|defaultlogin       = <!-- Leave blank -->
|defaultpass        = admin
|defaultssid        = <!-- default Wireless ID, Leave blank for unknown -->
|defaultssid_regex  = 
|default_ch         = <!-- Defaults channel(s) Radio(s) are set to -->
|manuf              = CyberTAN
|manuf_model        = <!-- Manufacturer Model -->
|manuf_rev          = <!-- Manufacturer Revision -->
|is_manuf           = No
|tpfirmware         = OpenWrt (leitec)

|availability       = <!-- Market availability -->
|eoldate            = <!-- End of Life date -->
|fccapprovdate      = 05/15/2008
|estreldate         = <!-- Estimated release date -->
|estprice           = <!-- Estimated retail price in US dollars -->
|upc                = <!-- UPC number -->
|ean                = <!-- EAN number -->
|dx_sku             = <!-- DealExtreme sku -->
|newegg             = <!-- newegg item number -->
|asin               = B000Z3U1P6
|asin_country       = US
|asin2              = <!-- ASIN number -->
|asin_country2      = <!-- ASIN country -->
|countrymanuf       = China

|buttons            = <!-- buttons available -->
|led                = <!-- Led colors and descriptions -->
|dimensions         = <!-- Size of device {{convert |length|x|widthordepth|x|height|in|mm}} -->
|weight             = <!-- Weight of device {{convert|weight|oz|g}} -->

|rad1chip1cpu       = true
|rad1chip2          = Ralink;RT2820;
|rad1oui            = <!-- Only if different from above OUI -->
|rad1_ant_conn      = <!-- Leave blank for unknown -->
|rad1txchains       = 2
|rad1rxchains       = 2
|rad1sstreams       = 2
|rad1stand          = IEEE 802.11b/g/n
|rad1n              = 300
|rad1g              = 54
|rad1b              = 11
|rad1freq           = 2.4

}}{{TIDTOC|embedded}}
==Overview==
"3763-01001201R" is silkscreened on the board in the FCC photos.

WRT160N v2 serial numbers appear to start with '''CSE1'''.

==Links of Interest==
===Firmware projects===
*[http://github.com/leitec/openwrt-leitec Supported by an unofficial fork of '''OpenWRT''' (''openwrt-leitec'')]
===Wikis===
*{{Wikidevi|Linksys_WRT160N_v2}}
*{{WPLink|Linksys_routers}}
*[http://wiki.openwrt.org/toh/linksys/wrt160n ''WRT160N series'' on the '''OpenWrt''' Wiki]
===Forum threads===
*[http://www.dd-wrt.com/phpBB2/viewtopic.php?t=44174 On the '''DD-WRT''' Forums] 
:(Note: ''DD-WRT'' doesn't currently support the WRT160Nv2)

==Flashing==
{{Flashnotice}}
{{DDWRTNotice|notsupported}}
===Flashing OpenWrt===
Please insert instructions here

==JTAG-Serial Info==
===Serial===
*[http://vectormm.net/routers/other-routers/59-vosstanovlenie-linksys-wrt-610n-cherez.html ''Serial Recovery'' on '''VectorMM''']
====Serial Pinouts====
<pre>
WAN Port    
        (   )
        (RxD)
        (TxD)
        (   )
        (GND)
         J10
</pre>

{{/Serial info}}

==Pictures==
 mode="slideshow"<center>'''User Images'''
<gallery mode="slideshow">
File:Linksys WRT160N v2.0 boardtop.jpg|
</gallery></center>[[Has images::internal| ]]

[[Category:English Documentation]]